DIY Scroll Wall Hanging

I have seen these paper scrolls in home decorating for awhile now. I love the farmhouse look and how you can use them for different seasonal decor. So, I decided to DIY one myself!

It’s an easy project to do! From start to finish it took me about 30 minutes. I had everything on hand! The best part? The paper is your main supply…and it’s a roll of craft paper from the Dollar Tree! Here are the things you will need for this specific project. Keep in mind you can make it your own! If you don’t want the beaded garland you could add a small bunch of greenery around the top or dried flowers!

Craft paper roll (from the Dollar Tree!)
Vinyl decal
Ribbon/yarn
Beaded garland (From Amazon)
4 paper clips
Scissors/ruler/pencil

First I decided the size I wanted for my paper scroll. I went with 15 inches wide. I flipped the roll around (so the scrolled/rolled side would be on the front). I measured my lines and cut the paper. I just cut extra for length so I could roll it as much as I wanted and not worry about it being too short. This was approximately 24 inches long.

Then I flipped it back around. I rolled the top and bottom, which the paper naturally did from being rolled on the tube. I paper clipped in each of the corners to hold the scroll in place. I picked a quote and cut my vinyl on my Cricut machine. If you don’t have that option you can find vinyl decals in most craft stores or on Etsy! I then transferred the vinyl onto the paper with transfer tape.

Next up I strung the yarn through the top of the scroll and then attached a little ribbon for hanging.

Lastly, I took my beaded garland and pulled it through the tube carefully. I recommend tying it to a piece of your yarn in the center of the garland to help support the weight. If you don’t use a garland you can skip this step and leave it as is or add some other florals or greenery! You could attach that with floral wire to the yarn easily.